Quantcast

Found $$=new wheels for Daddy!

kkocan's picture
Posts
357
Member
746 days
started by kkocan on February 16, 2007

As luck would have it the construction company I own is doing a job where we have been demolishing a lot of steel lately. The last return netted me some cash that I have decided to convert into wheels. I am going to spend around $1,200, and still be able to give a couple bucks to the wife, and am looking at one of the following setups. (My main race next year is IMWI)

1. Hed Jet 60 front and Jet 90 rear.
2. Hed 3 trispoke front and back.
3 ZIPP 404's.

My local bike shop doesn't carry HED or ZIPP, so I don't really have any one to talk to that has much experience on these wheels. Any input would be appreciated!
Thanks

________________________________________________
2008 Main Races:
VA Beach Shamrock Marathon
Desoto TTT
WV Mountaineer HIM
IM Wisconsin

glbrum's picture
Posts
835
Member
1230 days
glbrum posted 1 year ago.

IF you are looking at getting new wheels, the Zipps are out because they are over your budget. I think the HED's (trispokes) are also closer to $1500 for a new set.

If you do want new wheels, the JET 60/90 is a great set. I've heard nothing but good things about them.

If used isn't a problem than it's a tough call, but I'd lean towards to H3's. They are totally bomb proof and they look rad. They're also pretty aero as well. Zipps obviously are good, but since everyone has them I'd say go with something different.

What about a disk??? Renn disk's go for about $450 new.

jfuentes05's picture
Posts
39
Member
598 days
jfuentes05 posted 1 year ago.

I just bought 2006 404s from ebay for $1100, the trick is to buy them seperately, and not as a set, and I am planning on adding a Renn disc to the set.

kkocan's picture
Posts
357
Member
746 days
kkocan posted 1 year ago.

New is not a requisite, and I have been watching E-bay and could get some H3's or Zipps for that range. I could get Jets new however and I have been looking on slowtwitch and there's quite a few people over there who tout the new Jets.

________________________________________________
2008 Main Races:
VA Beach Shamrock Marathon
Desoto TTT
WV Mountaineer HIM
IM Wisconsin

mdd's picture
Posts
347
Member
686 days
mdd posted 1 year ago.

kkocan;62506 wrote:
I could get Jets new however and I have been looking on slowtwitch and there's quite a few people over there who tout the new Jets.

Anymore I would tend to do the OPPOSITE of what you hear on Slowtwitch. That place is really going downhill which is too bad.

Good luck on whatever you purchase!

Team Planet X Tyros

RV's picture
Posts
3283
Member
1264 days
RV posted 1 year ago.

kkocan;62496 wrote:
I am going to spend around $1,200, and still be able to give a couple bucks to the wife, and am looking at one of the following setups. (My main race next year is IMWI)

I have a set of HED-3's. They are great wheels. Also checkout the HED site - they also sell wheels with slight imperfections at a reduced cost. The wheels are still guaranteed but have some blemish or other.
I'll have mine at IMWI! See ya there!

RV

It takes a long time to get good. - Scott Molina
Slow is smooth; smooth is fast. - Rich Strauss

kkocan's picture
Posts
357
Member
746 days
kkocan posted 1 year ago.

mdd;62507 wrote:
Anymore I would tend to do the OPPOSITE of what you hear on Slowtwitch. That place is really going downhill which is too bad.

Good luck on whatever you purchase!

Yes, there seems to be a lot of unruly people in their forums. It seems every post has 2-3 replies that serve no purpose.

I am leaning towards the Hed Jet setup and may add a Renn or other disc next year if it so allows.

________________________________________________
2008 Main Races:
VA Beach Shamrock Marathon
Desoto TTT
WV Mountaineer HIM
IM Wisconsin

kkocan's picture
Posts
357
Member
746 days
kkocan posted 1 year ago.

Well after a lengthy call with Tim from Hed it looks like I'm ordering the Jet's. He recommended either the Jet setup, which he said will be a little more comfy than a pure carbon wheel or the H3C, which is a little priceer. All in all though it was a very informing conversation and am looking forward to my new wheels!! (I suppose I could forgo giving the wife some of the fun money and get the H3C's, but that may mean sleeping on the couch for a while!)

________________________________________________
2008 Main Races:
VA Beach Shamrock Marathon
Desoto TTT
WV Mountaineer HIM
IM Wisconsin

OzTriGuy's picture
Posts
87
Member
540 days
OzTriGuy posted 1 year ago.

Good luck with the jets. Can you post a review on them after you have tried them? I rate the H3Cs. They are AWESOME!!!!!!

kkocan's picture
Posts
357
Member
746 days
kkocan posted 1 year ago.

OzTriGuy;62559 wrote:
Good luck with the jets. Can you post a review on them after you have tried them? I rate the H3Cs. They are AWESOME!!!!!!

Unfortunately, unless they come with studded tires it may be a few weeks as I have about 3' of snow in my yard and lining my driveway right now. Will definitely post though once I get a ride on them and am looking forward to them.

________________________________________________
2008 Main Races:
VA Beach Shamrock Marathon
Desoto TTT
WV Mountaineer HIM
IM Wisconsin

catwood's picture
Posts
819
Member
1339 days
catwood posted 1 year ago.

Whenever somebody says that they want race wheels, I can't help but give a plug for Nimble ([url]http://www.nimble.net)[/url]. I have no affiliation with them except for customer, but they are awesome!

You can get Fly's for $900 and they are similar to zipp 303s except you get a choice of tubular or clincher and a custom spoke count for your weight and riding style or you can get Crosswinds for $1400 and those are trispokes. Their customer service is amazing too. I have a set of Fly's (and a set of Spiders) and they have been amazing for me.