Quantcast

Is there any way to repair a bike tire?

Milesofsmiles15's picture
Posts
66
Member
471 days
started by Milesofsmiles15 on May 21, 2008

I recently bought new tires for my bike only to dig a nail out of them a few weeks later. The guy at the bike shop said i need to get a new one, is there anything i can do with this tire? it's almost brand new minus the hole.

tsilcyc's picture
Posts
715
Member
781 days
tsilcyc posted 13 weeks ago.

Is it a hole or a rip in the tire? If it's a rip, this shouldn't even be a question. Tires are cheap, you're life is not.

-------------------------------------------------------------------
Check out my Log: http://www.felog.net/users/teamsln/query_log.aspx
Check out my Blog: http://www.felog.net/feblog/

RV's picture
Posts
3329
Member
1310 days
RV posted 13 weeks ago.

Use that tire on the trainer and get a new one for the road.

RV

It takes a long time to get good. - Scott Molina
Slow is smooth; smooth is fast. - Rich Strauss

TriSooner's picture
Posts
850
Member
245 days
TriSooner posted 13 weeks ago.

Not long term. You could - short term during a ride or race - put a 'boot' inside the tire: between the tube and tire wall you could put a tire patch or better yet, an empty gu wrapper. Put the tube in and inflate. Anything to keep the 100+psi of air pressure from pushing the tube through the hole in the tire. When this happens, you have an automatic and instantaneous flat (ie, blow-out) which is what tsilcyc refers to when he said it is dangerous to ride on a tire you know has a hole in it. It sucks, I know, but buy a new tire. Keep it and use it for winter indoor-training on a trainer which can use lower air pressure and tend to shred tires anyway.

cutiger95's picture
Posts
79
Member
99 days
cutiger95 posted 13 weeks ago.

Yep, visit pricepoint.com and pick something up on closeout if you don't have a ton of cash to spend. That is where I purchase tires and tubes for generally less than the cost of a kids Happy Meal.

Don't risk it with a 100 psi inflation and running 25 - 35 mph with nothing but a small lycra patch between you and the road surface.

Toothless's picture
Posts
63
Member
345 days
Toothless posted 13 weeks ago.

I have repaired small holes in clincher tires by applying a small amount of super glue, letting it dry, and then very lightly removing the excess glue with sand paper. You may need to apply a patch on the inside of the tire for backing.